Copper Ports :
8 10/ 100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
|
SFP/mini-GBIC Slots :
2 1000Base-SX/LX/BX SFP interfaces (Port-9 and Port-10) Compatible with 100Base-FX SF
|
Console :
1 x RJ-45-to-RS-232 serial port (115200, 8, N, 1)
|
Switch Architecture :
Store-and-Forward
|
Switch Fabric :
20Gbps / non-blocking
|
Throughput (packet per second) :
14.8Mpps@ 64Bytes packet
|
Address Table :
8K entries, automatic source address learning and ageing
|
Share Data Buffer :
4Mbits
|
Flow Control :
IEEE 802.3x Pause Frame for Full-Duplex Back pressure for Half-Duplex
|
|
|
Reset Button :
< 5 sec: System reboot > 5 sec: Factory Default
|
|
|
|
|
Enclosure :
IP30 Aluminum Metal Case
|
Installation :
DIN Rail Kit and Wall Mount Kit
|
Connector :
Removable 6-pin terminal block for power input Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 Removable 6-pin terminal block for DI/DO interface Pin 1/2 for DI 1 & 2; Pin 3/4 for DO 1 & 2; Pin 5/6 for GND
|
Alarm :
One relay output for power fail. Alarm Relay current carry ability: 1A @ DC 24V
|
DI/DO :
2 Digital Input (DI): Level 0:-24V~2.1V (±0.1V) Level 1: 2.1V~24V (±0.1V) Input Load to 24V DC, 10mA max. 2 Digital Output (DO): Open collector to 24VDC, 100mA max.
|
LED Indicator :
System: Power 1 (Green) Power 2 (Green) Fault Alarm (Green) Ring (Green) Ring Owner (Green) Per 10/100/1000T RJ-45 Ports: PoE In-Use (Orange) LNK/ACT (Green) Per SFP Interface: 1000 (Orange) LNK/ACT (Green)
|
Dimension (WxDxH) :
152 x 107x 72 mm
|
|
|
Power Requirement :
DC 48V
|
Power Consumption :
31.9 Watts / 108.78BTU (Full loading without PoE function) 306 Watts / 1043.46BTU (Full loading with PoE function)
|
PoE Standard :
IEEE 802.3af / IEEE 802.3at Power over Ethernet / PSE
|
PoE Power Supply Type :
End-Span
|
PoE Power Output :
Per Port 56V DC, 350mA . Max. 15.4 watts (IEEE 802.3af) Per Port 56V DC, 590mA. Max. 30 watts (IEEE 802.3at)
|
Power Pin Assignment :
1/2(+), 3/6(-)
|
PoE Power Budget :
258W maximum (depends on power input)
|
Max. number of Class 2 PD :
8
|
Max. number of Class 3 PD :
8
|
Max. number of Class 4 PD :
8
|
Basic Management Interfaces :
Console, Telnet, Web Browser, SNMP v1, v2c
|
Secure Management Interfaces :
SSH, SSL, SNMP v3
|
Port Configuration :
Port disable/enable Auto-Negotiation 10/100/1000Mbps full and half duplex mode selection Flow Control disable / enable Power saving mode control
|
Port Status :
Display each port’s speed duplex mode, link status, Flow control status, Auto negotiation status, trunk status
|
Port Mirroring :
TX / RX / Both 1 to 1 monitor
|
VLAN :
802.1Q Tagged Based VLAN, up to 255 VLAN groups Q-in-Q tunneling Private VLAN Edge (PVE) MAC-Based VLAN Protocol-Based VLAN Voice VLAN MVR (Multicast VLAN Registration) Up to 255 VLAN groups, out of 4094 VLAN IDs
|
Link Aggregation :
IEEE 802.3ad LACP / Static Trunk Supports 5 groups of 8-Port trunk support
|
QoS :
Traffic classification based, Strict priority and WRR 8-Level priority for switching Port Number 802.1p priority 802.1Q VLAN tag DSCP/TOS field in IP Packet
|
IGMP Snooping :
IGMP (v1/v2/V3) Snooping, up to 255 multicast Groups IGMP Querier mode support
|
MLD Snooping :
MLD (v1/v2) Snooping, up to 255 multicast Groups MLD Querier mode support
|
Access Control List :
IP-Based ACL / MAC-Based ACL Up to 123 entries
|
Bandwidth Control :
Per port bandwidth control Ingress: 500Kb~1000Mbps Egress: 500Kb~1000Mbps
|
SNMP MIBs :
RFC-1213 MIB-II IF-MIB RFC-1493 Bridge MIB RFC-1643 Ethernet MIB RFC-2863 Interface MIB RFC-2665 Ether-Like MIB RFC-2819 RMON MIB (Group 1, 2, 3 and 9) RFC-2737 Entity MIB RFC-2618 RADIUS Client MIB RFC-2933 IGMP-STD-MIB RFC3411 SNMP-Frameworks-MIB IEEE 802.1X PAE LLDP MAU-MIB
|
Operating Temperature :
-40 ~ 75 degrees C
|
Storage Temperature :
-40 ~ 85 degrees C
|
Humidity :
5 ~ 95% (Non-condensing)
|